Cancel starfire™ license – NavCom StarUtil Rev.G User Manual
Page 75
![background image](https://www.manualsdir.com/files/799516/content/doc075.png)
StarUtil User Guide – Rev. G
Cancel StarFire™ License
r must be navigating at the time of this command for the receiver to
Figure 72: Rover Configured for StarFire™ Navigation
To verify an active StarFire™ license, select View > D1 – LBM License Status.
Click the Retrieve button on the D1 tab. If no license is displayed on the tab, the
receiver will not decode the StarFire™ signal. If no license is displayed, select
View > D5 – LBM License Cancel History to display cancelled licenses.
The receive
accept the license cancellation.
9
Select Receiver > Commands > Cancel StarFire™ License. A caution message opens.
9
Click OK on the first caution message and Yes on the second message to cancel the
StarFire™ license.
9
Refer to the sections below:
• D5 – LBM License Cancel History: the history of the last two StarFire™ license
cancellations
• DD –
LBM License Cancel Codes: cancel codes to affirm the cancellation of the last two
StarFire™ licenses before the expiration dates
6-73