NavCom StarUtil Rev.G - Manual (Page 104)

StarUtil User Guide – Rev. G
„ Set the Origin Source
Click the icon to open the B1 – dow (see Figure 97 Plot Origin win ). 9
Figure 97: B1 – Plot Origin Window
Set the origin source from the:
or
e. Click
ly button. The first point received is plotted in the center of the crosshairs.
ion: Click the Message 51 button. Click the Apply button. The origin is plotted
nfigured as a
osition is stored in NVRAM, it can be retrieved to use as the origin.
9
• First Point Received: (default) Select DMS, Deg, DM, or Rad from the drop-down list f
Latitude and Longitude. Select Meters or Feet from the drop-down list for Altitud
the App
• Known Latitude and Longitude: Click the Entered values button. Type in the known
Latitude and Longitude. Select DMS, Deg, DM, or Rad from the drop-down list for
Latitude and Longitude. Select Meters or Feet from the drop-down list for Ellipsoidal
Height. Click the Apply button. The origin is plotted from the entered values.
• Base Posit
from the current base position stored in NVRAM. If a base receiver is reco
rover, and if a p
7-102