Almanac commands and almanac health, Get almanac, Get almanac into file – NavCom StarUtil Rev.G User Manual
Page 128: Send almanac from file, 44 – almanac health, Configuration reset, Figure 131: 44 – almanac health
StarUtil User Guide – Rev. G
Almanac Commands and Almanac Health
Get Almanac
9
Select Receiver > Commands > Get Almanac to retrieve the current almanac in the receiver
and output it via the Control Port.
Get Almanac Into File
9
Select Receiver > Commands > Get Almanac Into File to retrieve the current almanac in the
receiver and output it via the Control Port to a user defined file location. This file can then be
uploaded into another receiver.
Send Almanac From File
9
Select Rece
c file to
Figure 131):
• U
• UK
iver > Commands > Send Almanac From File to upload an almana
another receiver via the Control Port.
44 – Almanac Health
9
Select View > 44 – Almanac Health to view almanac health by PRN (see
– Unhealthy
– Unknown
• H – Healthy
Figure 131: 44 – Almanac Health
figuration Reset to reset the receiver to factory default
et the position, time, almanac, and ephemeris, but
factory default.
Configuration Reset
9
S lect Receiver > Commands > Con
e
settings. This command does not res
resets all other user settings to the
11-126