NavCom StarUtil Rev.G - Manual (Page 40)

StarUtil User Guide – Rev. G
WAAS Prn Selection
The WAAS Prn Selection window enables the user to manually configure the receiver to receive
corrections from one or two L1 SBAS satellites.
all SBAS systems that comply
‡
The WAAS Prn Selection window is functional for
with the RTCA/DO-229D standard: WAAS, EGNOS, MSAS, and GAGAN. Refer
to Related Standards in the fore-matter.
Figure 28: WAAS Prn Selection Window
9 Select Receiver > Setup > Select WAAS Prns. The WAAS Prn Selection window opens (see
e Prns:
• Auto Mode: Use the prns if the receiver doesn’t have a valid position fix. The receiver will
as a valid position.
Figure 28).
9 Enter one or two L1 SBAS satellite Prns.
9 Determine the use of th
• Manual Mode: Always use the entered prns.
update the SBAS prns to use after it h
4-38