NavCom StarUtil Rev.G - Manual (Page 74)

StarUtil User Guide – Rev. G
How to Access the StarFire™ Service
StarFire™ is a subscription service. The user pays a subscription, which licenses the use of the
e for a predetermined period of time.
g NavCom
servic
Subscriptions are available via a NavCom authorized representative, or by contactin
Sales Department ( [email protected] ).
orized subscription provides an encrypted key, which is specific to the serial number of
m receiver to be authorized. Typically the initial
An auth
the NavCo
license is preinstalled at the factory,
and the
file via
Provide
the NavCom receiver serial number, select View > AE-Version
(see Figure 80).
oad StarFire™ License
‡
The receiver must be navigating at the time of the license update for the receiver
to accept the license.
9 Save the StarFire™ license file received via email to the hard drive.
9 Select Tools > StarFire™ License I . The LBM License
window opens (see Figure 71
user installs subsequent licenses with StarUtil. The user receives the StarFire™ license
email.
the NavCom receiver serial number and the serial number on the GPS chassis when
requesting a new StarFire
™ license.
‡
To view
Information (see Figure 78) or View > D1-LBM License Status
L
nput to upload the StarFire™ license
).
Figure 71: StarFire™ License Upload Window
9 Click the button to browse to and select the StarFire™ license file. The path to the file
appears in the LBM License window.
9 Click the date button. A window opens to indicate a successful upload.
9 Click the
Up
icon on the toolbar to confirm that the rover is configured for StarFire™. The
Rover / Navigation & Tracking Setup window opens. The navigation mode, RTG input, must
be set to Use (the default) to enable StarFire™ navigation (see Figure 72).
1 Separate Software Option Required
6-72