Measurement Computing DaqView - Manual (Page 57)

Waveform & Digital Pattern Output Window 10
•
•
To use this feature Analog Output capability (DACs) must exist for the device.
When you select a channel, also check the channels which precede it.
For example, if you select CH 2, also check CH 0 and CH1.
Within DaqView there exists a waveform mode for devices that have analog output channels. DaqView
allows the associated DACs to be configured in interactive mode or waveform mode.
The window has two tabs: Analog Waveform and Streaming Output.
•
Selecting the Analog Waveform tab accesses the standard analog output window.
• Selecting the Streaming Output tab accesses the arbitrary waveform window. This tab cannot be used
with DBK46 or with several other devices including those in the following series: DaqBook/2000,
DaqLab/2000, and DaqScan/2000 .
Note:
This window is not available when the analog output window is visible.
The following material identifies the functions of various buttons and regions of the window. Refer to the
following screen shot as needed.
Waveform and Digital Pattern Output Window –
Analog Waveform Tab Selected
To use this feature, Analog Output (DACs)
must exist for the device.
DaqView User’s Guide 888994 Waveform & Digital Pattern Output Window 10-1