Measurement Computing DaqView - Manual (Page 45)

DaqView User’s Guide
877893 The Scope Window 5-9
Status Bar – Example 2 Digital Scope
Time: The time value (from the x-axis) for the position of the cursor last moved.
Value: The logic value, 1 (High) or 0 (Low) for the selected Bit at the cursor position.
Duty Cycle: For the span between two cursors, duty-cycle is the percentage time that the signal
remains at logic state 1 (High). For example, if the waveform signal is at logic 1 for half the
duration and at logic 0 the other half, the duty cycle is 50%.
Port Value (Hex): The aggregate value in hexadecimal format.
Status Bar – Example 3 Frequency Transform Scope
Freq.: The frequency value (from the x-axis) for the position of the cursor last moved.
Value: The amplitude (from the y-axis) of the selected channel at the cursor position.
Min: The largest negative value reached by the selected channel.
Max: The highest value reached by the selected channel.
Peak: The frequency peak of the transform spectrum.
Power: Power calculation.