Measurement Computing DaqView - Manual (Page 56)

Enhanced Counter Configuration
(Not part of the Counter/Timer Window. Enhance Counter Configuration applies only to 3000 Series Devices.)
If your Daq device supports enhanced counter configuration, for example, a DaqBoard/3000 Series device
or a Personal Daq/3000 Series device, you can use the “Enhanced Counter Configuration Settings” dialog
box [following figure] to independently set several parameters for each of four counters.
To access the “Enhanced Counter Configuration Settings” dialog box:
1. Open the Configure System Hardware dialog box.
2. Locate the “Advanced Features” panel at the lower left of the window.
3. Click on the button.
A dialog box, Enhanced Counter Configuration Settings, will open as indicated in the
following figure.
Enhanced Counter Configurations Settings*
*This dialog box is not an aspect of the Counter/Timer Window. Instead, it is accessed from the Hardware
System Configuration
dialog box when applicable to a device, e.g., DaqBoard/3000 Series and Personal
Daq/3000 Series devices.
Reference Notes
:
o Manuals for the DaqBoard/3000 Series, USB DaqBoard/3000 Series, and Personal
Daq/3000 Series devices each provide detailed information regarding counter
functions.
o Should you desire to convert counter readings to engineering units, refer to
Appendix A, Converting Counter Readings to Engineering Units for 3000 Series
Devices
.
9-2 Counter/Timer Window 907994 DaqView User’s Guide