Measurement Computing DaqView - Manual (Page 48)

Analog Meters
Selecting the Analog Meter icon brings up the Analog Meters window to display several channels in a
dial/gage format. To activate the display, select the button on the left side of the toolbar (or Start
All Indicators in the pull-down menu or in the toolbar). You can vary the number of channels displayed by
selecting the input box at the end of the toolbar. The Grid tool (next to last item on toolbar) is used to
arrange the display for convenient reading. The pushpin icon in the center of the toolbar locks this window
on top of other windows until you unlock it by selecting the pushpin again.
Right-click
on a meter to bring up an option menu.
Analog Meters for 6 Channels, Option Menu Shown at Right
6-2 Meters 899694 DaqView User’s Guide