Measurement Computing DaqView - Manual (Page 43)

DaqView User’s Guide
877893 The Scope Window 5-7
o Data Processing
The Data Processing Panel, at the lower section of the dialog box, will appear different for each
type of display. In addition to selecting Linear or Logarithmic scales and the number of scans per
block from the General Tab, the Data Processing panel provides a means of selecting a specific
process and entering parameters, as applicable to the associated display type.
Options Dialog Box –
Data Processing’s “General Tab” Selected
Note that the value in the “Scans per Block” field sets the block size which applies to Filter,
Spectrum, Frequency Transform and Windowing charts. For these displays the acquisition
data is separated into this custom block size. For other display types the value in this field
determines the number of data points visible in the initial display of data. Other data points
can then be viewed by scrolling.
Data Processing Panel –
“Frequency Transform Tab” Selected
This tab is shown only as one of many data processing examples. Data Processing
options vary according to the type of display.