Measurement Computing DaqView - Manual (Page 15)

DaqView & ViewXL User’s Guide
987691 A Tour of DaqView 2-7
The Configure System Hardware dialog box will appear. (See following figure.)
Whenever expansion cards are added you must update the
Configure System Hardware dialog box.
Configure System Hardware Dialog Box
On the left side of the box select any channel’s pull-down box to reveal the external connection options.
Besides the default [Direct Signal Connection] you can choose among the DBK option cards and
modules. The lower left-hand section of the dialog box includes an Advanced Features panel. Note that
the buttons in this panel, and , will only be enabled when applicable to your
device.
The right side of the screen sets up digital connections, if your Daq device is so equipped.
In our tour of DaqView, click <OK> at this time to return to the DaqView main window.
Reference Note:
Chapter 3 is dedicated exclusively to the Configure System Hardware dialog box.
The chapter provides examples of both analog and digital DBK setups.