Measurement Computing DaqView - Manual (Page 12)

2-4 A Tour of DaqView 987691 DaqView & ViewXL Us er’s Guide
DaqBoard/2003 Main Window
In this scenario the device only has 4 analog output channels. In this
case the DaqView main window allows for the use of four pull-down
menus and two buttons, and
Pattern Output>. There is no spreadsheet and all other buttons are
grayed-out.
DaqBoard/2003
DaqBoard/2003 is a special case.
The device only has 4 Analog
Output Channels. The main
window allows use of four pull-down
menus and two toolbar buttons:
and
and Pattern Output>. Remaining
toolbar buttons serve no purpose with
this board and are grayed-out.
DaqBoard/2003’s Main Window has
no spreadsheet.
DaqView Main Window, With no Analog Input Channels
Certain Daq devices have the
following combination of features:
Analog Output Channels
Digital I/O Channels
Counter Inputs
Timer Outputs
Notice that there are no P1
designated channels visible on the
spreadsheet because there are no
Analog Input Channels in this
scenario.
DaqView Main Window, No Analog Output Channels Available
Certain Daq devices have
Analog Input Channels
Digital I/O Channels
Counter Input Channels
Timer Output Channels
But because there are no Analog
Output Channels [in this case]
the
button is grayed-out.
Note that an exception exists for
devices that normally have no Analog
Output but are making use of a
DBK46 Analog Output option. If
that option is available to the device,
and is installed, then 4 analog output
channels will be available.
Consult your hardware user
documentation in regard to features
that apply to your specific device.