Leprecon LP-X24 Manual v3.2 - Manual (Page 98)

94 Chapter Four Moving Light Programming
LP-X24 and LP-X48 Users Manual
Label
Recording new scene
ColrFx
pink
Beam Attrib Focus
dark magenta
indigo
orange
green
red
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
Press the Beam softkey. Use the left wheel or the Plus (+) and Minus (-) keys in the
numeric keypad to make your selection.
Label
Recording new scene
Color
Defaults
BeamFx Attrib Focus
No Change
belly
fade
off-center c
open
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
Press the Focus softkey. Use the left wheel or the Plus (+) and Minus (-) keys in the
numeric keypad to make your selection.
Label
Recording new scene
Color Beam Attrib FocsFx
No Change
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
Defaults
Focus_001
Focus_002
Focus_003
Focus_004
6. Set the desired intensity by turning the side wheel.
7. Select the desired page and then press the Select button for the desired playback.