Leprecon LP-X24 Manual v3.2 - Manual (Page 124)

120 Chapter Five Advanced Programming and Editing Techniques
LP-X24 and LP-X48 Users Manual
Button/Fader Setting
Bump Any setting
Master Fader Up (typically full on)
Manual Fader Up (typically full on)
Programmer Fader Up (typically full on)
2. Using the side wheel, display channels with numbers higher than 24 (LP-X24) or 48
(LP-X48).
Recording new scene
Select
Level
Fade
0:00
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
3. Set levels for the virtual channels.
You may use the left wheel to select a channel and then use the center wheel to set
a level for it. You may also use the Channel button on the board. Please see
"Conventional Channel Input" beginning on page 19 for complete details.
These techniques will also work for setting levels for channels that have hardware
faders, too.
Recording new scene
Select
Level
Fade
0:00
FF
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
4. Save your settings.
Press the Select button for a playback to record a new look. Or press the Save
softkey to update the current look.