Leprecon LP-X24 Manual v3.2 - Manual (Page 145)

Working with Moving Light Attributes Chapter Seven 141
LP-X24 and LP-X48 Users Manual
To: Do:
Modify attributes for a different
property of the same light(s) Press the property's softkey (Color, Beam
or Focus) and repeat step 5 above.
Modify attributes for a different light
or group of lights (same type). Deselect the light or lights that are
currently selected. Then select the light or
lights (same type). Repeat step 5 above.
7. When you are done modifying attributes, press the Labels softkey or the No/Esc
button.
Label
Recording new scene
Color
open
BeamFx Attrib Focus
off-center c
perfora
radium
swirl
twism
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
To Reset Moving Light Attributes
Attribute overrides are designed to carry forward from look to look until you explicitly turn
them off. You can turn them off by resetting the attribute, by clearing the programmer or
by loading another look into the programmer. For example, in the previous procedure,
we applied rotation to the Beam property for a Studio Spot 250. All subsequent looks
that include the Studio Spot 250 will rotate
regardless of the color, beam, focus and
intensity settings until we explicitly reset the attribute or clear the programmer.
1. Put the LP-X into the following modes for moving light recording:
Button/Fader Setting
Modes Record and Scene
Display ML
Filter ML
Bump
Any setting
Master Fader Up (typically full on)
Manual Fader Any setting
Programmer Fader Up
Flashes to show that
attributes are applied