Leprecon LP-X24 Manual v3.2 - Manual (Page 117)

Advanced Programming and Editing Techniques Chapter Five 113
LP-X24 and LP-X48 Users Manual
Do this following the procedures given in "To Record Conventional
Light Looks" beginning on page 73 and "Dowse versus No Dowse Mode
The LP-X provides you two different modes in which to program.
In "Dowse" mode, you only see the lights that are selected that is, the lights that are
actively selected for programming.
In "No Dowse" mode, you see all lights in the look whether they are selected or not.
Toggle between these two modes when you are recording moving lights by pressing the
side wheel.
Label
Recording new scene
ColrFx Beam Attrib Focus
No instruments selected.
Delay
0:00.0 Fade
0:00.0
100%
Dowse
Intensity:
Label
Recording new scene
ColrFx Beam Attrib Focus
No instruments selected.
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
Recording Moving Light Looks" beginning on page 90.
2. Put the board into Edit/Playback mode.