Leprecon LP-X24 Manual v3.2 - Manual (Page 206)

202 Chapter Twelve Other Setup Features
LP-X24 and LP-X48 Users Manual
The Miscellaneous Menu
The Miscellaneous menu provides access to:
• Total, used and free memory display
• MIDI
settings
• The LP-X's clock setting. Note that until you set the clock, it will display 12:00 on the
screens where it appears.
To Set the MIDI In and Out Channels or Clock
1. From the Setup Mode screen, press the Misc softkey.
The Misc Settings screen appears.
Misc Settings
MIDI Out: 1
MIDI In: 1
Memory: Total: 14.94 MB Used: 142 KB
Free: 14.81 MB
Clock: 12:00
2. Use the left wheel to select MIDI In, MIDI Out or Clock.
3. Use the center wheel to increase or decrease the value for your selection.
The range for MIDI In is Omni or 1 through 16.
The range for MIDI Out is 1 through 16.
4. Press the Yes key when you are done.
To Send MIDI Signals
The LP-X can send and receive MIDI signals for the following events:
• Motion
of Manual Faders
• Motion of Playback Faders
• Button press of Solo/Add Bump buttons
• Button press of Conventional Light Bump buttons
• Changes of the Page selection
• Except + Select button combination (to move backward in a scene list)