Leprecon LP-X24 Manual v3.2 - Manual (Page 55)

Setup Essentials Chapter Two 51
LP-X24 and LP-X48 Users Manual
To Delete a Moving Light Instrument from the System
1. From the Setup Mode screen, press the Inst softkey.
The Instrument List screen appears.
2. Using the side wheel, scroll to select a moving light instrument to delete from the
system or press the ML Select button for the slot.
3. Press the Delete softkey.
Delete Instrument
Are you sure you want to delete this
instrument and all data associated with
Yes / No
it?
4. Press the Yes key to delete the instrument. Press the No/Esc key to stop the delete
operation.
To Reserve and Un-reserve DMX Channels
By default, the LP-X reserves DMX channels 1 through 100 (LP-X24) or channels 1
through 200 (LP-X48) for conventional lights. You may prefer to reserve more, fewer or
different channels for conventional lights. Use this procedure to make such changes.
1. From the Setup Mode screen, press the Inst softkey.
The Instrument List screen appears.
Note that you can display the same screen when you press the DMX softkey from
the Setup Mode screen and then the Resrve softkey.
2. Press the Resrve softkey.