Leprecon LP-X24 Manual v3.2 - Manual (Page 59)

Setup Essentials Chapter Two 55
LP-X24 and LP-X48 Users Manual
3. Using the keypad, enter a name for the patch.
Enter a patch name
Name:
PATCH FOR MATINEE
Yes / No
4. Press Yes to proceed or No/Esc to cancel.
Edit Copy New
Patch List
Default [ACTIVE]
PATCH FOR MATINEE
The LP-X displays the Patch List screen. Note that there are additional softkeys for
activating, editing and deleting your custom patch.
To Change which Patch is Active
1. From the Setup Mode screen, press the Patch softkey.
The Patch List screen appears. The active patch has the word [ACTIVE] after it.
2. Using the side wheel, select the patch you want to activate.
3. Press the Apply softkey.