Leprecon LP-X24 Manual v3.2 - Manual (Page 100)

96 Chapter Four Moving Light Programming
LP-X24 and LP-X48 Users Manual
Save Label
Record: PG 1 PB 1 Step: 2
Color Beam Attrib FocsFx
No Change
Delay
0:00.0 Fade
0:00.0
50%
No Dowse
Intensity:
Defaults
Focus_001
Focus_002
Focus_003
Focus_004
To Record a Look with More than One Moving Light
1. Put the LP-X into the following modes for moving light recording:
Button/Fader Setting
Modes Record and Scene
Display ML
Filter ML
or BOTH
Bump Any setting
Master Fader Up (typically full on)
Manual Fader Any setting
Programmer Fader Up
The LP-X displays the Moving Light Programmer.
Label
Recording new scene
ColrFx Beam Attrib Focus
No instruments selected.
Delay
0:00.0 Fade
0:00.0
100%
Dowse
Intensity:
2. Select lights for programming.
Please refer to "Selecting Moving Lights for Programming" beginning on page 87 for
information about the various ways in which you may select a light for programming.