Leprecon LP-X24 Manual v3.2 - Manual (Page 139)

Creating Moving Light Labels Chapter Six 135
LP-X24 and LP-X48 Users Manual
Rename Label
Renaming this label will affect all
selected fixture types.
Yes / No
New label name:
MY LABEL
6. Enter a new name for the label.
7. Press Yes to rename the label. Press No/Esc to cancel the operation.
To Delete a Label
Any scenes (looks) using a deleted label will be set to No Change.
1. Put the LP-X into the following modes for moving light recording:
Button/Fader Setting
Modes Record and Scene
Display ML
Filter ML
Bump
Any setting
Master Fader Up (typically full on)
Manual Fader Any setting
Programmer Fader Up
The LP-X displays the Moving Light Programmer.
2. Press the Color, Beam or Focus softkey.
3. Press the Label softkey.
4. Select the label that you want to delete.
If you do not see the label, you may need to restrict the instrument selection. The ML
Programmer only shows the labels that the selected instruments share in common.
5. Press the Delete softkey.