Leprecon LP-X24 Manual v3.2 - Manual (Page 65)

Setup Essentials Chapter Two 61
LP-X24 and LP-X48 Users Manual
3. Using the side wheel, select a channel assignment to delete.
4. Press the Delete softkey.
Delete Channel?
Are you sure that you want to remove all
mappings for this channel?
Yes / No
5. Press Yes to delete the channel assignment. Press No/Esc to cancel the operation.
Control Features
Some Moving Light devices have attributes that enable the user to send control signals
that strike, reset and douse lights from the LP-X console. These attributes are called
control features.
Feature When to Use
Lamp On Some fixtures do not start up automatically. Use the
Lamp On feature to strike the lamp.
Lamp Off Some fixtures do not shut off automatically. Use the
Lamp Off feature to douse the lamp.
You can also use this feature if an instrument needs
to be shut down during a show due to a mechanical
problem.
Home Resets the fixture. Use if an instrument is behaving
erratically due to a technical difficulty.
For a complete list of instruments that have control features, please refer to the
document "Leprecon Moving Light Library".
To use Control Features
Control features are only available for instruments that have DMX line assignments in
the show that is currently open.
1. From the Setup Mode screen, press the CtrlF softkey.
The Control Features screen appears.