Harken 948 MKIII Jib Reefing & Furling - Manual (Page 9)

Parts
March 2003 Unit 2.5 MKIII 5
1 Bag of 22 Connector Wedges, 4 Extra Wedges
1 Prefeeder with line
1 Bag of 38 Foil Screws. Contains 6 extra screws
1 Bag of three Torque Tube Screws
1 Bag of Spare Screws. Contains one spare screw
for every application. They are not required for
installation
1 5 mm Allen Wrench
1 6 mm Allen Wrench
1 8 mm Allen Wrench
1 Locking Collar
1 Plastic Split Cylinder
1 Instant Adhesive
1 Loctite
®
(Blue)
1 Loctite
®
(Red)
1 Feeder with screw
These parts are placed on the headstay before assembly
and may be "missing" as the parts may have been placed
on your headstay in advance.
1 Top Foil Trim Cap
1 11" (280 mm) Bottom Connector
8 9" (229 mm) Regular Connectors
If your headstay is longer than 61'9" (18.821 m)
you will need one more connector - Order part 899
for -22 rod; 982 for 7/16" 11 mm or 12 mm wire.
IMPORTANT
Note: threaded headstay stud is sold separately.
Be sure that you have ordered the correct size
for your boat.
Miscellaneous Parts
Rigger Components
1 Furling Line
100' (30.48 m ) of 3 /
8
" (9.5 mm) Dacron braid
1 Owner's Package
Contains the instruction manual, warranty card
and other information
Packed loose in the box
Foil Connector
Wedges
Prefeeder
Foil Screws
Torque Tube
Screws
Spare
Screws
Allen Wrenches Locking
Collar
Plastic Split
Cylinder
Instant
Adhesive
Blue Loctite ® Red Loctite ®
Top Foil
Trim Cap
Bottom
Connector
Regular Connectors