Guntermann & Drunck CATCenter X systems Operation - Manual (Page 83)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 83
5.4.3 F5 Edit Group
You can use the F5 key to edit an existing group. This edit function
corresponds to the explanation in Chapter 5.4.1.
5.5 Optimizing the Screen Display
The first time a console connects to a target, a video profile is automatically
created for the target. The CATCenter system offers the option to
subsequently adjust the video manually for all connected consoles using the
IVT mode.
After you access the VIDEO submenu in the list fieldFehler! Textmarke nicht
definiert. of the CONFIGURATION menu, the "IVT" window opens.
The user can adjust for various cable lengths using this function. The
individual design of this function makes it possible to use the subjective
perception of every person as the guideline for a "good picture".
The adjustment is carried out via the UCON (or UCON-s, UCON-a, UCON-IP)
using the connected keyboard.
The system covers the range from 0 - 190 and the adjustment can be made in
increments of 1.
Delay differences of the CAT-x cables (skew) are automatically compensated
electronically with the delay setting (only for UCON and UCON-s). However, a
manual setting is possible.
5.5.1 Rights
The following persons have the right to carry out the IVT function:
 The administrator
 All users granted the right to do so by the administrator. These users
must have video configuration rights (see User Accounts,
Chapter
5.1.1.3 ).
5.5.2 Accessing IVT Mode
You can access IVT mode via the CONFIGURATION menu. To do so, use the
UP ARROW and/or DOWN ARROW keys on your keyboard or the mouse to
select the entry Video in the CONFIGURATION menu and then press ENTER .