Guntermann & Drunck CATCenter X systems Operation - Manual (Page 109)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 109
5.8.3 Establishing the SelectKey
The second key of the hotkey that initializes the switching function can also be
modified. Proceed as described under modification of hotkey 1 (see
Chapter
5.8.1 ).
The following alternatives are available; groups of keys must always be
selected:
- 0.. 9 (default)
- NUM0 ... NUM9 (SelectKey in the number pad)
- Function keys F1 ... F10
- Alphabetic A ... K (without “J”)
When you have made the corresponding changes, your new hotkey for
computer 2 could appear as follows, for example:
WIN + B .
5.8.4 Turning the Screen Display On / Off for Multi-User
Operation
Here you can establish the setting for the multi-user operation screen display to
one of the following values (see
Chapter 5.1.1.4, Multi Access section):
- Permanent => on (permantly as long 2 users are connected to
the target)
- Never => off (multi-user display is never shown)
After you move the cursor to the Multi User Display field, you can use the
SPACEBAR (toggle) to select the desired option.
To save the settings, exit the menu with F2 .
Default setting: on