Guntermann & Drunck CATCenter X systems Operation - Manual (Page 55)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 55
The entries within the list field have the following meanings:
Execute Mouse Reset: (see Chapter 3.6 )
Change Personal Profile: (see Chapter 4)
Execute Target Power: (see Chapter 3.9 )
Multi Access:
Here you can grant or deny the user account the right to MultiAccess target
access via the CATCenter. The MultiAccess function is the option that a user
can access a target that is already in use by another user.
Both users simultaneous have the display of the target on their monitor, and full
keyboard / mouse access.
As soon as one of the users provides input via the keyboard or mouse, the
keyboard / mouse of the other user are automatically locked.
Once input has ceased, the system re-enables the keyboard / mouse after a
timeout of approx. 1 second, and access is once again possible for both users.
The active MultiAccess mode is permanently shown on the display of both the
initial and the second user (see
Chapter 5.8.4 ):
Example:
Win 2000 (Target name, editable)
Console 1 (Console name, editable)
MULTIUSER (Note regarding shared access)
The following parameters can be established here:
 no No multi-user right
 full Multi-user right for this user
 view Multi-user right for this user, but view-only
Default: MultiAccess = No