Guntermann & Drunck CATCenter X systems Operation - Manual (Page 57)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 57
TAB key. By entering the target name in this field, the cursor jumps directly to
the corresponding target in the list field. Keyboard input is also possible when
the cursor is in the list field.
With the menu item "Set target display", you can toggle the display mode of
the list field between "ALL" and a specific group. If you set the entry to "ALL"
using the
SPACEBAR, then all targets connected to the CATCenter are
displayed. If you select a group, then the list field only shows targets that also
belong to this group.
Furthermore, you can set all entries to one of the following values in this
window using the entry "Set all targets":
 no or
 full or
 view
You can reach all fields in the header using the TAB key. This key switches back
and forth between the entries mentioned above and the targets in the list field. Use
the
Spacebar (toggle) to change the values within these fields.
You can grant the user access rights to the targets displayed in the list using
F5 or Spacebar . Only the right-hand entries can be edited in the list field
(yellow font, individual rights). The entries in green are the effective rights of
the selected user. Only those targets to which the user is granted access here
are displayed in the SELECT menu! To do so, select the desired entry and
then change it to either "No", "Full", or "View".
Press ESC to exit the menu without saving the changes you have made. If you
choose to do this, a warning message is displayed.
W a r n i n g
You did not save your changes!
Press
F2 to save and exit
ENTER to exit without saving
ESC to cancel
F2 : Save and exit
Enter : Exit without saving
ESC: Cancel
Subsequently, you are returned to the EDIT USER submenu.
To save the changes you have made, press the F2 key and return to the EDIT
USER submenu.
Default setting: no access