Guntermann & Drunck CATCenter X systems Operation - Manual (Page 67)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 67
5.2.3.2 Edit Config Rights
Here you can assign configuration rights to the group account.
By pressing the ENTER key or left-clicking on the entry CONFIG RIGHTS, the
following submenu opens:
C o n f i g R i g h t M a r k e t i n g
S e t a l l r i g h t s t o n o
N a m e G r p
User
no
Target no
Console no
Video no
System no
Network no
Power no
ESC
TAB F2 Save
In this window, you can use "Set all rights to" to set all entries to one of the
following values:
 yes or
 no
Use the TAB key to access this pre-select field. This key alternates between
the "Set all rights to" entry and the other seven configuration areas. Use the
Spacebar (toggle) to change the values within the "Set all rights to" field.
Here you can also assign configuration rights to the user group. Only those
configuration items activated for the user group can be selected by the
members of this user group in the Configuration menu
F11 (displayed in
white)! To do so, select the desired entry and then change it to either "yes" or
"no".
Use the ESC key to exit the CONFIG RIGHT submenu. If you have made any
changes up to this point but wish to exit the CONFIG RIGHT submenu without
saving your changes, a notification message to that effect will be displayed.
To save the changes you have made, press the F2 key and return to the EDIT
USER GROUP submenu.
Default setting: no