Guntermann & Drunck CATCenter X systems Operation - Manual (Page 80)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 80
All editing tasks carried out up to this point can be saved by pressing the F2
key.
Use the ESC key to exit the TARGET GROUP CONFIG submenu.
5.4.1 F3 Add Group
If you want to create a new target group, press the F3 key in the TARGET
GROUP CONFIG submenu. The following window is opened:
A d d G r o u p
Group name
ESC F2: Save
Assign a unique name for this group in the line Group name. A maximum of
12 alphanumeric characters is available to you for this purpose.
Press ESC to exit the menu without saving the changes you have made. To
save the changes you have made, press the F2 key. Subsequently, you are
returned to the TARGET GROUP CONFIG submenu.
To add new targets to this group, press the F5 key. The GROUP MEMBERS
submenu opens; here you can add targets to the new group you have created.
In case of existing target groups, this list shows all targets already assigned to
this group.
G r o u p M e m b e r s W I N G R P
S e a r c h
F3 Add Member
F5 Edit group name F4: Delete member
F2: Save