Guntermann & Drunck CATCenter X systems Operation - Manual (Page 10)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 10
Footer The header is the lower blue area of an AdonIS window.
Header
The header is the upper blue area of an AdonIS window.
List field The list field is the middle area of an AdonIS window.
Network
Ethernet with IP protocol.
Service Port
You can install a firmware update on the CATCenter via the
service port (2.5 mm plug). You will find the CATCenter
service port on the front of the device.
Target
A target is any device that can be operated via a CATCenter.
Transmission RJ45 interface of the UCON products used to connect to the
CATCenter. The transmission interface is connected to a
console port of the CATCenter with a CAT-x cable.
UCON
The UCON devices are used for console connections and
thus provide the user with access to the CATCenter system.
The user can operate and configure via the UCON devices.
The UCON devices are offered in five variations (UCON,
UCON-a, UCON-s, UCON-IP-eco, UCON-IP).
F o o t e r
H E A D E R
L I S T F I E L D