Guntermann & Drunck CATCenter X systems Operation - Manual (Page 18)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 18
2.4.4 Target Info "Ctrl + F12"
The SELECT menu shows all targets connected to the CATCenter. The targets
that are turned on are displayed in green; those that are turned off are
displayed in red.
However, this display method does not give you any information regarding the
connection location of the targets on the CATCenter.
To receive this connection information, proceed as follows:
a) Select a target with the mouse or the keyboard (arrow keys). This
selection is not confirmed with the ENTER key or double-clicking with
the mouse. The selected target is identified with a black bar. In the
following example, a Linux computer was selected.
b) Now press the hotkey combination CTRL + F12 (not changable).
In the window that opens (see next page), you will find the following
information:
a) The target you are currently accessing
b) The console port to which your own console is connected
c) The CPU port where this target is connected
d) Display of the connection dynamics in case of cascading
S e l e c t m e n u
S o r t A l p h + S h o w A l l
C P U s e a r c h : . . . . . . . . . . . . . .
WIN2000
1 WIN NT
Linux
SUN SPARC 5
Linux Server
3 CPU-ID 123456
2 BSD
WIN2000
WIN NT
↑
↓
F9: Operation F10: Pers. Profile
F11: Config F12: Info