Guntermann & Drunck CATCenter X systems Operation - Manual (Page 14)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 14
2.4 The Target Selection SELECT Menu
After the LOGIN, the SELECT menu is automatically opened.
This menu shows all targets connected to the CATCenter. The targets that are
turned on and were detected during installation are displayed in green (the
CATCenter detects a target when the CATpro2 is supplied with power by the
target). Targets that are turned off are displayed in red.
S e l e c t M e n u
S o r t A l p h + o n S h o w A L L
C P U s e a r c h : . . . . . . . . . . . . . .
WIN2000
1 WIN NT
Linux
SUN SPARC 5
Linux Server
3 CPU-ID 12345678
2 BSD
WIN2000
WIN NT
↑
↓
F9: Operation F10: Pers. Profile
F11: Config F12: Info
CPU Search Function
C P U S e a r c h : . . . . . . . . . . . . . . .
To find the desired target quickly, the SELECT menu has a search function.
Enter the name of the desired target. The search is carried out as soon as you
start entering characters.
Target Name
CPU-ID 12345678
By default, the target name corresponds to the ID number of the CATpro2
used. Each CATpro2 is assigned a unique ID. This ID is marked on a label on
the CATpro2. This target name can be edited in the SELECT menu.