Guntermann & Drunck CATCenter X systems Operation - Manual (Page 39)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 39
To include a target in the scan process, press the SPACEBAR (toggle) on the
selected target. The "S" character signifies that the selected target is included
in the scan process. Entering a dash (-) excludes the target from the scan
process.
To save the changes you have made, press the F2 key. You are then returned
to the PERS. PROFILE menu.
4.5 Positioning the Target Display on the Monitor
Use this menu item „Set Display Position“ to adjust the position + size of the
channel display on the screen.
Press the
ENTER key to enter edit mode; now you can move the display to the
desired location using the arrow keys or the mouse.
+
S e t D i s p l a y
F 2 : S a v e
In order to ensure optimal legibility of AdonIS for all resolutions, the size of the
display can be changed for monitor resolutions greater than 640 x 480 using
the
PgUp + PgDn keys.
F2 saves the setting and takes you back to the PERS. PROFILE menu .
To cancel the settings, press the
ESC key. This action also takes you back to
the PERS. PROFILE menu.