Guntermann & Drunck CATCenter X systems Operation - Manual (Page 34)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 34
To turn off a target, carry out the following steps:
1. Access AdonIS by pressing the key combination (default): CTRL +
NUM
2. Access the OPERATION menu by pressing the F9 key.
3. Move the cursor to the entry "TARGET POWER" and press the
ENTER key or the I key.
By pressing the ENTER key a security advice appears on your screen. By
confirming the selected (and running) target is automatically turned off.
After the target has been turned off, the entry in the "TARGET POWER" line
changes from On to Off.
Follow the same process to turn on a target that is not running.
Alternatively, the function can be called from the SELECT menu using the
hotkey combination
CTRL + I.
3.10 Administrator LoginFehler! Textmarke nicht
definiert. to an OpenAccess Console
This function is only available if OpenAccess has been activated on the
console you are currently working on (see
Chapter 5.6.2 ). This function
provides you with temporary administrator access to an OpenAccess console.
For more information on this function, see
Chapter 5.6.2.3.