Guntermann & Drunck CATCenter X systems Operation - Manual (Page 112)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 112
To do so, use the UP ARROW and/or DOWN ARROW keys on your keyboard
or the mouse to select the corresponding entry in the SYSTEM CONFIG
submenu and then press
ENTER . The entry in this field can now be
overwritten. Pressing the ENTER key again completes data entry.
The settings established here can be seen in the following areas:
 Target Info submenu (see Chapter 2.4.4 )
 In the configuration software CATCenter Xview
Press
ESC to exit the menu without saving the changes you have made. If you
choose to do this, a warning message is displayed.
W a r n i n g
You did not save your changes!
Press
F2 to save and exit
ENTER to exit without saving
ESC to cancel
F2 : Save and exit
Enter : Exit without saving
ESC: Cancel
Press the F2 key to permanently save your changes. This returns you to the
CONFIGURATION menu