Guntermann & Drunck CATCenter X systems Operation - Manual (Page 68)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 68
5.2.3.3 Edit Operation Rights
Here you can define which OPERATION rights should be available to the user
account in the OPERATION menu (
F9 ).
By pressing the ENTER key or left-clicking on the entry "EDIT OPERATION
RIGHTS, the following submenu opens:
O p e r a t i o n R i g h t
S e t a l l r i g h t s t o n o
N a m e G r p
Mouse Reset
no
Personal Profile no
Multi Access no
Target Power no
Change own password no
ESC
TAB F2 Save
In this window, you can use "Set all rights to" to set all entries to one of the
following values:
 yes or
 no
Use the TAB key to access this pre-select field. This key alternates between
the "Set all rights to" entry and the other four operation areas. Use the
Spacebar (toggle) to change the values within the "Set all rights to" field.
Here you can also assign configuration rights to the user group. Only those
operation items made available to the user are displayed in the OPERATION
menu in white and are therefore available to the members of this user group!
To do so, select the desired entry and then change it to either "yes" or "no".
Use the ESC key to exit the OPERATION RIGHT submenu. If you have made
any changes up to this point but wish to exit the OPERATION RIGHT submenu
without saving your changes, a notification message to that effect will be
displayed.
To save the changes you have made, press the F2 key and return to the EDIT
USER GROUP submenu.
Default setting: See window display