Guntermann & Drunck CATCenter X systems Operation - Manual (Page 53)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 53
5.1.1.3 Edit Config Rights
Here you can assign configuration rights to the user account. These rights are
the individual rights of the selected user. These are displayed in the "Ind"
column. The effective rights of the user are displayed in the "Eff" column (see
Chapter 5.1.1.2 ).
By pressing the ENTER key or left-clicking on the entry CONFIG RIGHTS, the
following submenu opens:
C o n f i g R i g h t U s e r 2
S e t a l l r i g h t s t o n o
N a m e E f f I n d
User
yes no
Target yes no
Console yes no
Video yes no
System no no
Network no no
Power no no
Esc
TAB F2 Save
In this window, you can use "Set all rights to" to set all entries to one of the
following values:
 yes or
 no
Use the TAB key to access this pre-select field. This key alternates between
the entry "Set all rights to" and the other seven configuration areas. Use the
Spacebar (toggle) to change the values within the „Set all rights to" field.
Here you can assign configuration rights to the user account. Only those
configuration items activated for the user can be selected by the user in the
Configuration menu
F11 (displayed in white)! To do so, select the desired
entry and then change the current value in the column "Ind" to either "yes" or
"no".
Use the ESC key to exit the CONFIG RIGHT submenu. If you have made any
changes up to this point but wish to exit the CONFIG RIGHT submenu without
saving your changes, a notification message to that effect will be displayed.
To save the changes you have made, press the F2 key and return to the EDIT
USER submenu.
Default setting: no