Guntermann & Drunck CATCenter X systems Operation - Manual (Page 116)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 116
Pressing the ENTER key opens a submenu that provides you with the following
options:
P o w e r M a n a g e m e n t
S o r t A l p h + S h o w A l l
C P U s e a r c h : . . . . . . . . . . . . . .
Accounting1 00000209
CPU-ID 000b020a
000b020a
Sales2 00000577
CPU-ID 0000sd94
0000sd94
F5: Edit power setting
ESC
You can change the sort order of the list field by modifying the entry in the
SORT field. Press the
TAB key to reach the SORT field. Use the Spacebar
(toggle) to switch between the 5 entries:
Alph+: Ascending alphabetic sort of the targets
Alph+on: 1. Ascending alphabetic sort of the connected
(Default) targets and subsequently
2. Ascending alphabetic sort of the unconnected targets
Alph-: Descending alphabetic sort of the targets
Alph-on:
1. Descending alphabetic sort of the connected
targets and subsequently
3. Descending alphabetic sort of the unconnected targets
ID: Displays the physical name of the CATpro2
Press the TAB key to reach the Show field. Use the Spacebar (toggle) to
switch between the 2 entries:
"All" means:
All targets are displayed in the list field.
"GRP" means: Only groups are displayed in the list field.
The list field shows all targets connected to the CATCenter. The left column
contains the current logical name of the respective target. This logical name
can be edited (see
Chapter 5.3.1.1 ). The right column displays the physical
name of the target. The CATpro2 used to connect the target to the CATCenter
assigns this name to the target. This name cannot be edited.
Press the
ESC key to complete all editing tasks and return to the
CONFIGURATION menu.