Guntermann & Drunck CATCenter X systems Operation - Manual (Page 37)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 37
4.2 Setting the Scan Interval
Set the cursor to the line SCANTIME. The existing entry can be edited by
pressing the
ENTER key.
A scan time of 1 – 99 seconds is valid.
ENTER completes the entry.
To save the changes you have made, press the
F2 key. You are then returned
to the SELECT menu.
4.3 Establishing Keys for StepScan
Here you can define the keys used for manually cycling through computers
(STEPSCAN,
see Chapter 3.3 ).
The following keys or mouse buttons are available:
Up Dn UP arrow and DOWN arrow
PgUp PgDn Page Up and Page Down
NUM Up Dn UP arrow and DOWN arrow on the number pad
NUM PgUp PgDn Page Up and Page Down on the number pad
NUM + - PLUS and MINUS on the number pad
Explorer mouse Buttons 4 and 5 of the Intelli-Explorer-mouse
After you move the cursor to the STEPKEYS field, you can use the
SPACEBAR (toggle) to select the desired option.
To save the changes you have made, press the
F2 key. You are then returned
to the SELECT menu.