Guntermann & Drunck CATCenter X systems Operation - Manual (Page 50)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 50
5.1.1.2.1 Adding a User to a Group
To assign a user to a user group, proceed as follows:
By pressing the ENTER key or left-clicking on the entry Group Membership,
the following submenu opens:
M e m b e r s h i p U s e r 2
S o r t A l p h + o n S h o w A l l
S e a r c h : . . . . . . . . . . . . . .
Administration
Marketing DISABLED
Sales
F3: Add F4: Remove
SPACE: Toggle TAB F2: Save
The list field displays all group memberships of the respective selected user. If
a user has been assigned to a group, this group is displayed in green in the list
field. All other groups are displayed in yellow. Groups that are currently not
available have the note "DISABLED" in the second column.
The user may already be a member of user groups. This indicated by a green
arrow that points to the right. A user can belong to a maximum of 20 groups.
Users can only be assigned to groups displayed in this list field. User groups
are created by administrators and by users with configuration rights.
To assign a user to a group to which he or she has not been assigned yet,
move the cursor to the desired group entry. Press the
SPACEBAR (toggle) or
the F3 key to assign the user to the selected group. A green arrow appears in
front of the group name. However, the group name is still displayed in yellow.
The process is completed by pressing the
F2 key, and the user is now a
member of the selected group. If the Group Membership submenu is opened
again, the previously selected group is now displayed in green and has a green
arrow.