Guntermann & Drunck CATCenter X systems Operation - Manual (Page 38)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 38
4.4 Defining SelectKeys & Default Computer / Scan
Participation
After you select this menu item (with either the mouse or the keyboard), the
following window opens.
A s s i g n S e l e c t k e y , S c a n & D e f a u l t
S o r t ► A l p h + ◄ S h o w : A l l
WIN2000
1 S
WINXP 2 S
► LINUX 3 S
SUN Sparc 4 S
0 – 9 , - : Set Selectkey
SPACE: Scanmode F2 : Save
Enter: Default
In this menu, each user can define an individual target-SelectKey assignment
for the targets he or she can access.
Column 1: Identifies the default computer
Column 2: Target name
Column 2: SelectKey for direct selection
Column 3: Scan mode setting
Rights: Can be changed by each user with the configuration right
“Personal Profile”.
Scope: Each user can modify his or her own profile.
After login, the system can connect directly to a computer without having to
select it first in the Select menu. You can define this default computer in this
menu. To do so, use the arrow keys to move to a desired computer within the
list field and press the
Enter key. A yellow triangle appears in front of the
selected computer. Pressing the Enter key again cancels this assignment.
To modify the SelectKey, use the mouse or the
UP ARROW or DOWN
ARROW keys on your keyboard to select the desired target. Assign a new
SelectKey to the target by pressing one of the following keys on your keyboard:
 Any number key (0 - 9) or
 Any number pad key (NUM 0 – NUM 9) or
 Any letter (A – K) or
 Any number F-key (F1 - F9)
You can only pick a SelectKey that matches your specifications in the menu
Configuration -> System -> SelectKey (see
Chapter 5.7.3 ). Entering a dash
(-) erases the entry that was made.