GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 45)

PL1877A Microprocessor Radio Telephone Interconnect PC Programming
39 12/10
Signaling
Signaling – Telephone Line Dialing – Dialing Method
Telephone Line Dialing Type
Chooses the type of landline out-dialing compatible with the available telephone service. The default is
DTMF.
Mobile DTMF Regeneration
Determines whether regeneration of DTMF numbers occurs during dialing. If disabled, all valid DTMF
digits are simply passed through to the telephone line unprocessed or un-regenerated, except for auto-
leveling (i.e. transparent). Disabling allows certain controls characters, such as the * and #, to pass
through to the phone-line to support special applications. These applications include local PABX paging,
call transfers, etc. For most applications, this should be enabled to ensure accurate dialing. When
enabled, only digits 0–9 and A–D are regenerated.
Pseudo DTMF Regeneration
Controls regeneration of DTMF after mobile dialing is ended. If enabled, additional DTMF digits after
the cut-through timer expires will be regenerated. It also mutes the receive audio for the duration of the
cut-through delay. If disabled, additional DTMF digits from the mobile are passed through un-
regenerated.