GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 119)

PL1877A Microprocessor Radio Telephone Interconnect Parameter Modification
113 12/10
Para-
meter
No.
Description
Control Digits Refer to
Section on
Page:
1005 Determines whether pulse dial decoding
for landline selective signaling input is
enabled or disabled. 0 = Disabled
1 = Enable 123
1006 Determines whether 6 dB/octave de-
emphasis of selective signaling tones is
enabled or disabled. 0 = Disabled
1 = Enable 122
1007 Determines whether selective signaling
from a landline caller on line 2 is enabled
or disabled. 0 = Disable
1 = Enable
Default = 0 122
1008 Determines whether 5-tone diagnostic
mode is enabled or disabled. 0 = Disable
1 = Enable 122
1009 Enable or disable the ability of a landline
user to cause generation of group calls for
a selected paging type. 0 = Disable
1 = Enable 126
1010 Enable or disable the ability of an
attendant to cause generation of group
calls for a selected paging type. 0 = Disable
1 = Enable 126
1011 Enable or disable the ability of a mobile
user to cause generation of group calls for
a selected paging type. 0 = Disable
1 = Enable 126
1012 Determines whether dual-addressing in
Motorola 5-Tone selective signaling is
enabled or disabled. 0 = Disable
1 = Enable 128
1081 Allows selection of the type of selective
signaling for a landline user. 0 = DTMF
1 = 2-Tone
2 = Plectron
3 = 2805
4 = 1500
5 = Motorola/EIA 5-Tone
8 = TPL
9 = DPL
$F = Multi-mode 123
1082 Determines the action to take when the
time allotted for receiving the first
selective signaling or user ID digit expires
or an improper phone line dialing is
received. 0 = Disconnect
1 = Revert to ring signaling
2 = Revert to user ID 00 123
1083 Determines the number of digits accepted
from a landline user for selective
signaling. The valid range depends on the
type of selective signaling selected. 0-6 = DTMF, 2805, 1500
0-3 = 2-Tone
0-4 = Plectron
0-6 = Motorola/EIA 123