GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 111)

PL1877A Microprocessor Radio Telephone Interconnect Parameter Modification
105 12/10
Para-
meter
No.
Description
Control Digits Refer to
Section on
Page:
16 Determines whether phone line battery
reversal or loss, to disconnect mobile
originated call is allowed. 0 = Don’t allow
1 = Allow
Default = 0 93
17 Determines whether phone line battery
reversal or loss, to disconnect landline
originated call is allowed. 0 = Don’t allow
1 = Allow
Default = 0 93
18 Determines whether the mobile user is
allowed to override the access time limit
with ***. 0 = Don’t allow
1 = Allow
Default = 0 94
19 Determines whether the *** command
resets the overall access timer to 1 minute
or the time specified by parameter 357. 0 = Resets timer to 1 minute
1 = Resets timer to duration
specified by parameter 357. 94
20 Enables or disables the triple key access
feature. 0 = Disable
1 = enable
Default = 0 92
21 Enables or disables parameter modification
from a remote DTMF telephone. 0 = Disable
1 = Enable
Default = 1 90
22 Enables or disables parameter modification
via a modem. 0 = Disable
1 = Enable
Default = 1 90
23 Determines whether a landline user can
disconnect a mobile originated call using
the DTMF # command. 0 = Disable
1 = Enable 93
24 Determines whether emergency call direct
access is enabled or disabled. 0 = Disable
1 = Enable
Default = 0 102
25 Determines whether revert from direct
access timer to overall access timer upon
detection of mobile carrier is enabled or
disabled. 0 = Disable
1 = Enable
Default = 0 100
26 Enables or disables multiple ringing to
mobiles. 0 = Disable
1 = Enable
Default = 0 103
27 Enables or disables mobile ring signaling
prior to direct access. 0 = Disable
1 = Enable
Default = 1 99
28 Enables or disables enhanced VOX
attention getting ticks. 0 = Disable
1 = Enable 84
29 Determines whether enhanced VOX,
landline transmit timer is enabled or
disabled. 0 = Disable
1 = Enable 84