Definitions and acronyms – GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual User Manual
Page 171

165
12/10
Definitions and Acronyms
Term
Definition
CSQ
Carrier squelch
Capcode
The identifying number on the outside of the radio pager. It is related to the tone or
digital code that gives the address and other information about this particular pager.
Carrier
Squelch
Detection of a valid mobile signal is based on loss (squelch) of random channel noise.
CTCSS
Continuous Tone Controlled Subaudible System – A means of grouping users of a
common radio channel. Subaudible tones are transmitted with audio; a particular radio's
speaker (or the speakers of a group of radios) will unmute to broadcast a transmission
only if the associated subaudible tone identifies it as belonging to the radio's user group.
CDCSS
Continuous Digital Coded Squelch System – A system analogous to CTCSS but using
low speed digital signaling instead of subaudible tones.
Diagnostics
Tests to determine if any hardware or software problems exist.
DPL
DTMF
Dual-Tone, Multi-Frequency – is a method used by the telephone system to
communicate the keys pressed when dialing. Pressing a key on the phone’s keypad
generates two simultaneous tones, one for the row and one for the column.
HLGT
High level guard tone
LLGT
Low level guard tone
Plectron
Patch
A term synonymous with interconnect
PTT
Push-to-talk – a switch, which when pressed, causes the radio to transmit.
RX, Receive To accept a signal from a radio.
TPL
TX,
Transmit
To send a signal to a radio.
Squelch
A system that prevents audio from being heard when no signal is being received.