GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 121)

PL1877A Microprocessor Radio Telephone Interconnect Parameter Modification
115 12/10
Para-
meter
No.
Description
Control Digits Refer to
Section on
Page:
1129 Selected code plan number for single-
mode and 2-tone paging. N
OTE : This
parameter must be loaded such that the 1st
digit of the 2-digit decimal code plan
number appears in the upper nibble and the
2nd digit appears in the lower nibble.
Example: code plan #23 would be loaded
as $23.
Valid range = 00–24 (decimal) 126
1130 Preamble tone number for single-mode and
Motorola/EIA 5-Tone paging. N
OTE : This
parameter must be loaded such that the 1st
digit of the 2-digit decimal tone number
appears in the upper nibble and the 2nd
digit appears in the lower nibble.
Example: code plan #25 would be loaded
as $25.
Valid range = 00–25 (decimal) 128
1131-
1139
DTMF paging preamble Valid digit range – 0–$F 126
1140-
1142
Preprogrammed 2-Tone paging digits Valid digit range = 0–9 126
1143-
1146
Preprogrammed Plectron paging digits.
N
OTE : The first 2 digits of a Plectron
capcode cannot exceed 35.
Valid digit range = 0–9 127
1147-
1155
2805 paging preamble Valid digit range = 0–9 127
1156-
1164
1500 paging preamble Valid digit range = 0–9 127
1165-
1170
Preprogrammed Motorola/EIA 5-Tone
paging digits Valid digit range = 0–9 128
1179-
2878
Multi-mode paging table See appropriate section. 124
4871-
4890
Auto-dial location #10 See appropriate section. 98
4891-
4910
Auto-dial location #11 See appropriate section. 98
4911-
4930
Auto-dial location #12 See appropriate section. 98
4931-
4950
Auto-dial location #13 See appropriate section. 98
4951-
4970
Auto-dial location #14 See appropriate section. 98