GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 116)

Parameter Modification PL1877A Microprocessor Radio Telephone Interconnect
12/10 110
Para-
meter
No.
Description
Control Digits Refer to
Section on
Page:
139–144 Prefix to * attendant access code - the code
an attendant user enters as a prefix to the *
command before being granted direct
channel access or selective signaling
privileges.
Valid range = 0–$D 101
145–150 Landline remote parameter programming
code - when enabled, the code must be
entered as a prefix to one of the landline
programming commands.
Valid range = 0–9, A–D, FF
Default = disabled 90
163 Off-hook Voltage Threshold See appropriate section. 88
165 Time between automatically answering a
land-line call and generating a beep
prompt (time = 500 ms + x)50 ms)) Valid range = 0–15
Default = 0 99
177–196 Auto-dial location #1. See appropriate section. 98
197–216 Auto-dial location #2. See appropriate section. 98
217–236 Auto-dial location #3. See appropriate section. 98
237–256 Auto-dial location #4. See appropriate section. 98
257–276 Auto-dial location #5. See appropriate section. 98
277–296 Auto-dial location #6. See appropriate section. 98
297–316 Auto-dial location #7. See appropriate section. 98
317–336 Auto-dial location #8. See appropriate section. 98
337–356 Auto-dial location #9. See appropriate section. 98
357 Overall access time limit. Any number
greater than 59; sets the overall access
time limit to an infinite duration. Valid range = 1-59 minutes
Default = 0 94
358 The number of 25-ms periods in the signal
search frequency. Valid range = 10–100 83
359 The number of 5-ms periods in the signal
search sample duration. Valid range = 3–20 83
360 The length of time before disconnect that
time out warning ticks are generated. Valid range = 0–59 seconds
Default = 15 94
361 Determines the time between SID
transmissions. If this parameter is
programmed to 0, periodic SID is disabled. Valid range = 0–59 minutes 95
362-367 Multi-digit access prefix #1. Valid range = 0–9, A–D, FF 91
368-373 Multi-digit access prefix #2. Valid range = 0–9, A–D, FF 91
374-379 Multi-digit access prefix #3. Valid range = 0–9, A–D, FF 91
380-385 Multi-digit access prefix #4. Valid range = 0–9, A–D, FF 91