GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual User Manual
Page 118
Parameter Modification
PL1877A Microprocessor Radio Telephone Interconnect
12/10 112
Para-
meter
No.
Description
Control Digits
Refer to
Section on
Page:
496–499 Four-digit emergency access number
excepted from toll restrictions.
Valid range = 0–9 (4 digits)
97
500
Maximum phone number length allowed.
If this parameter is greater than 20, an
entry of 20 is assumed.
Valid range = 1–20
97
501–512 Station ID (SID)
See appropriate section.
95
514
Enhanced VOX delay.
Valid range = 0–100
Default = 100
84
515–517 Override table entry corresponding to
multi-digit access prefix #1.
See appropriate section.
91
518–520 Override table entry corresponding to
multi-digit access prefix #2.
See appropriate section.
91
521–523 Override table entry corresponding to
multi-digit access prefix #3.
See appropriate section.
91
524–526 Override table entry corresponding to
multi-digit access prefix #4.
See appropriate section.
91
527–529 Override table entry corresponding to
security code.
See appropriate section.
91
530–535 Wildcard access/release code template - a
6-byte template that defines the structure
of wildcard access/release codes. The
code appearing in the template must be
right justified (the last digit of the template
must be in parameter 535). Filling the
template with $FF disables wildcard
features.
Refer to the Wildcard
Access/Release section in this
manual.
91
549
Signaling pretime - the delay between
activating the PTT and generating mobile
signaling.
Valid range = 0–24
Default = 3
87
1001
Determines whether selective signaling
from a landline caller on line 1 is enabled
or disabled.
0 = Disabled
1 = Enable
Default = 0
117
1002
Determines whether selective signaling
from an attendant is enabled or disabled.
0 = Disabled
1 = Enable
Default = 0
119
1003
Determines whether mobile revertive
mobile-to-mobile signaling is enabled or
disabled.
0 = Disabled
1 = Enable
Default = 0
119
1004
Determines whether the PL strip output
during transmission of selective signaling
tones is activated or deactivated.
0 = Deactivate
1 = Activate
122