GAI-Tronics 700 Series 24 V DC Page/Party Systems User Manual
Systems, Confidentiality notice, General information
Pub. 42004-140E
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374
800-492-1212 Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Installation of 700 Series
24 V DC Page/Party
®
Systems
Confidentiality Notice
This manual is provided solely as an operation, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The GAI-Tronics Page/Party
®
system is a modular industrial communication system incorporating from
two to possibly hundreds of stations. Available in several forms, each station includes a handset, two
amplifiers (one for the handset and the other to drive one or more paging speakers), associated controls,
and a paging speaker (usually mounted separately). All stations are wired in parallel and additional
stations may be added at any time.
A GAI-Tronics Page/Party
®
system layout should be planned in advance of installation. Select handset
station locations carefully, taking convenience, accessibility, and personal safety into account. The
quantity and location of paging speakers must be carefully considered, particularly in areas of high
ambient noise or reverberation.
The speaker amplifier built into each station drives one horn-loaded paging speaker. If additional paging
speakers are needed, separate speaker amplifiers can be added to the system. In quiet areas, such as
offices, several paging speakers can be connected to a single station.
Please refer to Publication 42004-135, Speaker Installation, or consult with a GAI-Tronics sales
representative for additional system planning information.
Document Outline
- Pub. 42004-140E
- Confidentiality Notice
- General Information
- Power Source Considerations
- Installation Procedure
- Step 1 — Electrical Noise Considerations
- Step 2 — Mounting of Station & Speaker Amplifier Enclosure
- Step 3 — Mounting of Line Balance Assembly
- Step 4 — Installation of Inter-station Conduit & Cable
- Step 5 — Installation of Amplifiers & Subsets
- Step 6 — Checkout and Adjustment
- Step 7 — Troubleshooting the System
- Special Note Regarding Installation
- Safe Power Connection/Disconnection
- Typical Single-Party System Connection Diagram
- Typical Multi-Party System Connection Diagram
- Warranty