GAI-Tronics 232-001 Pole Mounting Kit User Manual
Confidentiality notice, General information, Installation
Pub. 42004-105
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
800-492-1212 Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 232-001
Pole Mounting Kit
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 232-001 Pole Mounting Kit is for use with GAI-Tronics Tough Telephone Weatherproof
Enclosures Models 226, 227, and 228.
Bracket Mounting Procedure
1. The bracket should be mounted 54 inches
from the floor to the positioning hole on the
bracket.
2. The universal bands are capable of securing
the bracket to poles that are between 2.5
inches and 15 inches in diameter. For
additional support in wood poles, use 3/8
-
inch
or 1/2
-
inch lug bolts with washers (not
included).
Installation
With the screw fully retracted, slip the free end of
the band through one of the outer slots in the rear
of the bracket. Be sure the clamp is positioned
with the bolt head located opposite the outer slot
to allow for clearance. See Figure 1.
Figure 1.